81 Publications (Page 2 of 4)
2016
Data indicating temperature response of Ti-6Al-4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping
Marshall, G.J.⋅Marshall, Garrett J⋅Thompson, Scott M⋅Thompson, S.M.⋅Shamsaei, N. and Shamsaei, Nima
Data in Brief, vol. 7, pp. 697-703. | Journal Article
 
Data related to cyclic deformation and fatigue behavior of direct laser deposited Ti-6Al-4V with and without heat treatment
Sterling, A.J.⋅Sterling, Amanda J⋅Torries, Brian⋅Torries, B.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Thompson, Scott M and Thompson, S.M.
Data in Brief, vol. 6, pp. 970-973. | Journal Article
 
Effect of cooling rate on thermal performance of an oscillating heat spreader
Lu, H.⋅Thompson, S.M.⋅Laun, F.F. and Ma, H.B.
Journal of Thermophysics and Heat Transfer, vol. 30, pp. 461-465. | Journal Article
 
Erratum to "Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V" [Mater. Sci. Eng. A 655 (2016) 100-112] Doi: 10.1016/j.msea.2015.12.026
Sterling, A.J.⋅Sterling, Amanda J⋅Torries, Brian⋅Torries, B.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Thompson, Scott M⋅Thompson, S.M.⋅Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 655. | Journal Article
 
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Sterling, A.J.⋅Sterling, Amanda J⋅Torries, Brian⋅Torries, B.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Thompson, Scott M⋅Thompson, S.M.⋅Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 655, pp. 100-112. | Journal Article
 
Systematic optimization of Laser-based Additive Manufacturing for multiple mechanical properties
Aboutaleb, A.M.⋅Bian, L.⋅Shamsaei, N. and Thompson, S.M.
IEEE International Conference on Automation Science and Engineering, vol. 2016-November, pp. 780-785. | Conference Proceeding
 
Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring
Marshall, G.J.⋅Marshall, Garrett J.⋅Young, W. Joseph⋅Young, W.J.⋅Thompson, S.M.⋅Thompson, Scott M.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Daniewicz, S.R.⋅Daniewicz, Steve R.⋅Shao, Shuai and Shao, S.
JOM, vol. 68, pp. 778-790. | Journal Article
 
Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V
Torries, B.⋅Torries, Brian⋅Sterling, Amanda J⋅Sterling, A.J.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Thompson, Scott M⋅Thompson, S.M.⋅Daniewicz, S.R. and Daniewicz, Steve R
Rapid Prototyping Journal, vol. 22, pp. 817-825. | Journal Article
2015
Additive manufacturing of heat exchangers: A case study on a multi-layered Ti-6Al-4V oscillating heat pipe
Thompson, S.M.⋅Aspin, Z.S.⋅Shamsaei, N.⋅Elwany, A. and Bian, L.
Additive Manufacturing, vol. 8, pp. 163-174. | Journal Article
 
An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
Shamsaei, N.⋅Shamsaei, Nima⋅Yadollahi, Aref⋅Yadollahi, A.⋅Bian, L.⋅Bian, Linkan⋅Thompson, Scott M and Thompson, S.M.
Additive Manufacturing, vol. 8, pp. 12-35. | Journal Article
 
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
Thompson, Scott M⋅Thompson, S.M.⋅Bian, Linkan⋅Bian, L.⋅Shamsaei, N.⋅Shamsaei, Nima⋅Yadollahi, Aref and Yadollahi, A.
Additive Manufacturing, vol. 8, pp. 36-62. | Journal Article
 
Effect of substrate thickness on micro-hardness of direct laser deposited Ti-6Al-4V parts
Marshall, G.J.⋅Young, W.J.⋅Thompson, S.M.⋅Seely, D. and Shamsaei, N.
 
Effect of substrate thickness on micro-hardness of direct laser deposited Ti-6Al-4V parts
Marshall, G.J.⋅Young, W.J.⋅Thompson, S.M.⋅Seely, D. and Shamsaei, N.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Effect of vapor flow on the wetting behavior of unstable evaporating menisci in heated capillary tubes
Zhao, W.G.⋅Thompson, S.M.⋅Wang, H.⋅Ma, H.B. and Solbrekken, G.L.
International Journal of Multiphase Flow, vol. 75, pp. 250-256. | Journal Article
 
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Yadollahi, A.⋅Yadollahi, Aref⋅Shamsaei, Nima⋅Shamsaei, N.⋅Thompson, Scott M⋅Thompson, S.M.⋅Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 644, pp. 171-183. | Journal Article
 
Electromagnetic induction by ferrofluid in an oscillating heat pipe
Monroe, J. G.⋅Monroe, J.G.⋅Vasquez, E. S.⋅Vasquez, E.S.⋅Aspin, Z. S.⋅Aspin, Z.S.⋅Walters, K. B.⋅Walters, K.B.⋅Berg, M. J.⋅Berg, M.J.⋅Thompson, S. M. and Thompson, S.M.
Applied Physics Letters, vol. 106. | Journal Article
 
Energy harvesting via ferrofluidic induction
Monroe, J. Gabriel⋅Gabriel Monroe, J.⋅Gabriel Monroe, J.⋅Vasquez, E.S.⋅Vasquez, Erick S.⋅Aspin, Zachary S.⋅Aspin, Z.S.⋅Fairley, J.D.⋅Fairley, John D.⋅Walters, K.B.⋅Walters, Keisha B.⋅Berg, M.J.⋅Berg, Matthew J.⋅Thompson, S.M. and Thompson, Scott M.
Proceedings of SPIE - The International Society for Optical Engineering, vol. 9493. | Conference Proceeding
 
Fatigue behavior of ti-6al-4v alloy additively manufactured by laser engineered net shaping
Sterling, A.J.⋅Torries, B.⋅Lugo, M.⋅Shamsaei, N. and Thompson, S.M.
 
Fatigue behavior of ti-6al-4v alloy additively manufactured by laser engineered net shaping
Sterling, A.J.⋅Torries, B.⋅Lugo, M.⋅Shamsaei, N. and Thompson, S.M.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Fatigue Behaviour of Additively Manufactured Ti-6Al-4 v
Sterling, A.⋅Shamsaei, N.⋅Torries, B. and Thompson, S.M.
Procedia Engineering, vol. 133, pp. 576-589. | Conference Proceeding
 
Mechanical and microstructural properties of LENS-produced AISI 316l stainless steel
Yadollahi, A.⋅Seely, D.⋅Patton, B.⋅Shamsaei, N. and Thompson, S.M.
 
Mechanical and microstructural properties of LENS-produced AISI 316l stainless steel
Yadollahi, A.⋅Seely, D.⋅Patton, B.⋅Shamsaei, N. and Thompson, S.M.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Mechanical and microstructural properties of selective laser melted 17-4 ph stainless steel
Yadollahi, A.⋅Shamsaei, N.⋅Thompson, S.M.⋅Elwany, A. and Bian, L.
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2A-2015. | Conference Proceeding
 
Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
Bian, L.⋅Bian, Linkan⋅Thompson, Scott⋅Thompson, S.M.⋅Shamsaei, N. and Shamsaei, Nima
JOM, vol. 67, pp. 629-638. | Journal Article
 
Microstructure and mechanical properties of ti-6al-4v parts fabricated by laser engineered net shaping
Bagheri, A.⋅Shamsaei, N. and Thompson, S.M.
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2A-2015. | Conference Proceeding