189 Publications (Page 5 of 8)
2021
High Temperature Tensile and Fatigue Behaviors of Additively Manufactured IN625 and IN718
Ghiaasiaan, R.⋅Poudel, A.⋅Ahmad, N.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
(pp. 581-587)
 
Room Temperature Mechanical Properties of Additively Manufactured Ni-base Superalloys: A Comparative Study
Ghiaasiaan, R.⋅Poudel, A.⋅Ahmad, N.⋅Muhammad, M.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
(pp. 109-115)
 
Sabotaging metal additive manufacturing: Powder delivery system manipulation and material-dependent effects
Graves, L.⋅King, W.E.⋅Carrion, P.⋅Shao, S.⋅Shamsaei, N. and Yampolskiy, M.
Additive Manufacturing, vol. 46. | Journal Article
 
Superior tensile properties of Hastelloy X enabled by additive manufacturing
Ghiaasiaan, R.⋅Muhammad, M.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
Materials Research Letters, vol. 9, pp. 308-314. | Journal Article
2020
A predictive discrete-continuum multiscale model of plasticity with quantified uncertainty
Tan, J.⋅Villa, U.⋅Shamsaei, N.⋅Shao, S.⋅Zbib, H.M. and Faghihi, D.
 
Effect of alloying elements on the ?? antiphase boundary energy in Ni-base superalloys
Dodaran, M.⋅Ettefagh, A.H.⋅Guo, S.M.⋅Khonsari, M.M.⋅Meng, W.J.⋅Shamsaei, N. and Shao, S.
Intermetallics, vol. 117. | Journal Article
 
Effect of heat treatment and hot isostatic pressing on the morphology and size of pores in additive manufactured Ti-6Al-4V parts
Zhang, B.⋅Ham, K.⋅Shao, S.⋅Shamsaei, N. and Thompson, S.M.
(pp. 107-114)
 
Improved high cycle fatigue performance of additively manufactured 17-4 PH stainless steel via in-process refining micro-/defect-structure
Nezhadfar, P.D.⋅Anderson-Wedge, K.⋅Daniewicz, S.R.⋅Phan, N.⋅Shao, S. and Shamsaei, N.
Additive Manufacturing, vol. 36. | Journal Article
 
Investigating the Interaction between Persistent Slip Bands and Surface Hard Coatings via Crystal Plasticity Simulations
Crystals. | Journal Article
 
Low temperature growth of Cu thin films on TiN(001) templates: Structure and energetics
Zhang, X.⋅Shao, S.⋅Miraz, A.S.M.⋅Wick, C.D.⋅Ramachandran, B.R. and Meng, W.J.
Materialia, vol. 12. | Journal Article
 
On the failure mechanisms of Cr-coated 316 stainless steel in bending fatigue tests
Zhang, B.⋅Haghshenas, A.⋅Zhao, J.⋅Shao, S.⋅Khonsari, M.M.⋅Guo, S. and Meng, W.J.
International Journal of Fatigue, vol. 139. | Journal Article
 
Understanding of plasticity size-effect governed mechanical response and incomplete die filling in a microscale double-punch molding configuration
Zhang, B.⋅Dodaran, M.S.⋅Shao, S.⋅Choi, J.⋅Park, S. and Meng, W.J.
International Journal of Mechanical Sciences, vol. 172. | Journal Article
2019
An Engineered Biomimetic MPER Peptide Vaccine Induces Weakly HIV Neutralizing Antibodies in Mice
Shao, S.⋅Huang, W.-C.⋅Lin, C.⋅Hicar, M.D.⋅LaBranche, C.C.⋅Montefiori, D.C. and Lovell, J.F.
Annals of Biomedical Engineering. | Journal Article
 
Computational study of metal/ceramic interfacial adhesion and barriers to shear displacement
Miraz, Abu Shama Mohammad⋅Sun, Shoutian⋅Shao, Shuai⋅Meng, Wen J.⋅Ramachandran, Bala Ramu and Wick, Collin D.
Computational Materials Science, vol. 168, pp. 104–115. | Journal Article
 
Critical operating stress of persistent slip bands in Cu
Dodaran, M.⋅Khonsari, M.M. and Shao, S.
Computational Materials Science, vol. 165, pp. 114-120. | Journal Article
 
Effect of heat treatments on pore morphology and microstructure of laser additive manufactured parts
Zhang, Bin⋅Zhang, Bin⋅Meng, Wen Jin⋅Meng, Wen Jin⋅Shao, Shuai⋅Shao, Shuai⋅Phan, Nam⋅Phan, Nam⋅Shamsaei, Nima and Shamsaei, Nima
Material Design & Processing Communications, vol. 1, pp. e29. | Journal Article
 
Effect of Heat Treatments on the Morphology of Pores in Laser Additive Manufactured Parts
Zhang, Bin⋅Zhang, Bin⋅Meng, Wenjin⋅Meng, Wenjin⋅Shao, Shuai⋅Shao, Shuai⋅Phan, Nam⋅Phan, Nam⋅Shamsaei, Nima and Shamsaei, Nima
Manufacturing Letters. | Journal Article
 
Energetic, structural and mechanical properties of terraced interfaces
Dodaran, M.⋅Dodaran, M.⋅Wang, J.⋅Wang, J.⋅Chen, Y.⋅Chen, Y.⋅Meng, W.J.⋅Meng, W.J.⋅Shao, S. and Shao, S.
Acta Materialia, vol. 171, pp. 92–107. | Journal Article
 
Energetic, Structural and Mechanical Properties of Terraced Interfaces
Dodaran, M.⋅Wang, J.⋅Chen, Y.⋅Meng, W.J. and Shao, S.
 
-Book chapter-
Meng, W.J. and Shao, S.
In Experimentation and modeling of mechanical integrity and instability at metal/ceramic interfaces. (pp. 153-210). 2019
 
Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: Effects of build orientation and microstructure
Nezhadfar, P.D.⋅Nezhadfar, P.D⋅Burford, Emma⋅Burford, Emma⋅Anderson-Wedge, Kathryn⋅Anderson-Wedge, Kathryn⋅Zhang, Bin⋅Zhang, Bin⋅Shao, Shuai⋅Shao, Shuai⋅Daniewicz, S.R.⋅Daniewicz, S.R⋅Shamsaei, Nima and Shamsaei, Nima
International Journal of Fatigue, vol. 123, pp. 168–179. | Journal Article
 
Fatigue of Additive Manufactured Ti-6Al-4V, Part II: The Relationship Between Microstructure, Material Cyclic Properties, and Component Performance
International Journal of Fatigue. | Journal Article
 
Fatigue of Additive Manufactured Ti-6Al-4V, Part I: The Effects of Powder Feedstock, Manufacturing, and Post Process Conditions on the Resulting Microstructure and Defects
International Journal of Fatigue. | Journal Article
 
Interface Facilitated Reorientation of Mg Nanolayers in Mg-Nb Nanolaminates
Chen, Y.⋅Chen, Y.⋅Gong, M. Y.⋅Gong, M.Y.⋅Shao, S.⋅Shao, S.⋅Mara, N.A.⋅Mara, N. A.⋅Wang, J. and Wang, J.
JOM, vol. 71, pp. 1215-1220. | Journal Article
 
Mechanical response and incomplete filling in compression molding with microscale double-punch sets
Zhang, B.⋅Dodaran, M.⋅Shao, S. and Meng, W.J.
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2A-2019. | Conference Proceeding