189 Publications (Page 2 of 8)
2025
Fatigue behaviour of additively manufactured AlSi10Mg and 17?4 PH SS cylindrical notched specimens: The effect of volumetric defects
Poudel, A.⋅Pegues, J.⋅Kelly, M.⋅Shao, S. and Shamsaei, N.
Engineering Failure Analysis, vol. 175. | Journal Article
 
Fatigue crack growth in L-PBF Ti-6Al-4V: Influence of notch orientation, stress ratio, and volumetric defects. International Journal of Fatigue
. | Journal Article
 
Fatigue Criticality Assessment of Volumetric Defects in Notched Specimens: A Non-Destructive Approach
Poudel, A.⋅Pegues, J.⋅Kelly, M.⋅Shao, S. and Shamsaei, N.
Fatigue and Fracture of Engineering Materials and Structures, vol. 48, pp. 3746-3759. | Journal Article
 
Fatigue-defect criticality in laser powder bed fused aluminum alloys
Baig, S.⋅Jam, A.⋅Beretta, S.⋅Shao, S. and Shamsaei, N.
Theoretical and Applied Fracture Mechanics, vol. 140. | Journal Article
 
High cycle and very high cycle fatigue behavior of additively manufactured Inconel 718: Effects of stress-relieving, surface texture, part orientation, and test frequency
Muhammad, M.⋅Lee, S.⋅Frye, P.⋅Simsiriwong, J.⋅Shao, S. and Shamsaei, N.
Engineering Failure Analysis, vol. 169. | Journal Article
 
ML-based detection of critical defects in additively manufactured parts via X-ray computed tomography?
Perghem, D.⋅Salehnasab, B.⋅Beretta, S.⋅Shao, S. and Shamsaei, N.
Materials and Design, vol. 260. | Journal Article
 
Modeling the short fatigue crack growth in additively manufactured notched parts. International Journal of Solids and Structures
. | Journal Article
 
Multiaxial fatigue behavior and modeling for additive manufactured Ti-6Al-4V: The effect of surface texture
Lee, S.⋅Molaei, R.⋅Carrion, P.E.⋅Shao, S. and Shamsaei, N.
International Journal of Fatigue, vol. 201. | Journal Article
 
Multi-objective Bayesian optimization for blocking in extreme value analysis and its application in additive manufacturing
Irfan, S.⋅Ahmad, N.⋅Vinel, A.⋅Silva, D.F.⋅Shao, S.⋅Shamsaei, N. and Liu, J.
 
Non-destructive detection of critical defects in additive manufacturing
Baig, S.⋅Jam, A.⋅Beretta, S.⋅Shao, S. and Shamsaei, N.
Scientific Reports, vol. 15. | Journal Article
 
Nondestructive fatigue life prediction for additively manufactured metal parts through a multimodal transfer learning framework
Li, A.⋅Poudel, A.⋅Shao, S.⋅Shamsaei, N. and Liu, J.
Iise Transactions, vol. 57, pp. 1344-1359. | Journal Article
 
On extreme value theory-based estimation of surface quality for metal additive manufacturing
Nikfar, M.⋅Irfan, S.⋅Baugh, L.⋅Mahmood, S.⋅Ahmad, N.⋅Liu, J.⋅Schulze, K.⋅Shao, S.⋅Vinel, A. and Shamsaei, N.
Progress in Additive Manufacturing, vol. 10, pp. 6657-6672. | Journal Article
 
Simulated effect of defect volume and location on very high cycle fatigue of laser beam powder bed fused AlSi10Mg. International Journal of Fatigue
. | Journal Article
 
Sliding wear behavior of additively manufactured Ti-6Al-4V: The effect of thermal treatment
Joshy, J.⋅Kuriachen, B.⋅Ahmad, N.⋅Shamsaei, N. and Shao, S.
Wear, vol. 580-581. | Journal Article
 
Synergistic Effects of Notch and Volumetric Defects on Fatigue Performance of Additive Manufactured Parts
Poudel, A.⋅Pegues, J.⋅Lowney, M.⋅Shao, S. and Shamsaei, N.
 
Temperature-dependent fatigue behavior of additively manufactured Hastelloy-X: The effect of manufacturing process
Muhammad, M.⋅Ghiaasiaan, R.⋅Gradl, P.R.⋅Schobel, A.⋅Godfrey, D.⋅Shao, S. and Shamsaei, N.
Journal of Manufacturing Processes, vol. 136, pp. 123-136. | Journal Article
 
Tensile and fatigue behaviors of additively manufactured Ti-6Al-4V: Influence of surface texture and removal
Ahmad, N.⋅Salehnasab, B.⋅Maleki, E.⋅Stonaker, K.⋅Ashforth, C.⋅Shao, S. and Shamsaei, N.
Engineering Failure Analysis, vol. 182. | Journal Article
 
Understanding fatigue of additively manufactured TPMS metallic metamaterials: Experiments and modeling
Dyer, K.⋅Amjadi, M.⋅Shao, S.⋅Shamsaei, N. and Molaei, R.
Additive Manufacturing, vol. 111. | Journal Article
 
Understanding Fatigue of Additively Manufactured Tpms Metallic Metamaterials: Experiments and Modeling
Dyer, K.⋅Amjadi, M.⋅Shao, S.⋅Shamsaei, N. and Molaei, R.
 
Understanding the influence of different surface treatments on surface texture and fatigue behavior of L-PBF HAYNES? 282
Ahmad, N.⋅Maleki, E.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
Applied Surface Science Advances, vol. 30. | Journal Article
2024
Additively manufactured 316L stainless steel via laser powder directed energy deposition (LP-DED): Mechanical properties at cryogenic and elevated temperatures. International Journal of Fatigue
. | Journal Article
 
Additively manufactured Ti-5Al-5V-5Mo-3Cr: Understanding defect-fatigue relationships
Yasin, M.S.⋅Jam, A.⋅Habibnejad-Korayem, M.⋅Haghshenas, M.⋅Shao, S. and Shamsaei, N.
International Journal of Fatigue, vol. 187. | Journal Article
 
ASTM interlaboratory study on tensile testing of AM deposited and wrought steel using miniature specimens
Dzugan, J.⋅Lucon, E.⋅Koukolikova, M.⋅Li, Y.⋅Rzepa, S.⋅Yasin, M.S.⋅Shao, S.⋅Shamsaei, N.⋅Seifi, M.⋅Lodeiro, M.⋅Lefebvre, F.⋅Mayer, U.⋅Olbricht, J.⋅Houska, M.⋅Mentl, V. and You, Z.
Theoretical and Applied Fracture Mechanics, vol. 131. | Journal Article
 
Effect of Heat Treatment on the Micro-/Defect-structure and Mechanical Behavior of Additively Manufactured AlF357 Aluminum Alloy
Khan, M.F.⋅Gradl, P.R.⋅Godfrey, D.⋅Diemann, J.⋅Shao, S. and Shamsaei, N.
(pp. 672-684)
 
Effect of Heat Treatment on the Micro-/Defect-structure and Tensile Behavior of Additively Manufactured A6061-RAM2 Aluminum Alloy
Khan, M.F.⋅Ghiaasiaan, R.⋅Gradl, P.R.⋅Firdosy, S.⋅Shao, S. and Shamsaei, N.
(pp. 685-698)