81 Publications (Page 2 of 4)
2016
Data indicating temperature response of Ti-6Al-4V thin-walled structure during its additive manufacture via Laser Engineered Net Shaping
Marshall, G.J.Marshall, Garrett JThompson, Scott MThompson, S.M.Shamsaei, N. and Shamsaei, Nima
Data in Brief, vol. 7, pp. 697-703. | Journal Article
 
Data related to cyclic deformation and fatigue behavior of direct laser deposited Ti-6Al-4V with and without heat treatment
Sterling, A.J.Sterling, Amanda JTorries, BrianTorries, B.Shamsaei, N.Shamsaei, NimaThompson, Scott M and Thompson, S.M.
Data in Brief, vol. 6, pp. 970-973. | Journal Article
 
Effect of cooling rate on thermal performance of an oscillating heat spreader
Lu, H.Thompson, S.M.Laun, F.F. and Ma, H.B.
Journal of Thermophysics and Heat Transfer, vol. 30, pp. 461-465. | Journal Article
 
Erratum to "Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V" [Mater. Sci. Eng. A 655 (2016) 100-112] Doi: 10.1016/j.msea.2015.12.026
Sterling, A.J.Sterling, Amanda JTorries, BrianTorries, B.Shamsaei, N.Shamsaei, NimaThompson, Scott MThompson, S.M.Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 655. | Journal Article
 
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Sterling, A.J.Sterling, Amanda JTorries, BrianTorries, B.Shamsaei, N.Shamsaei, NimaThompson, Scott MThompson, S.M.Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 655, pp. 100-112. | Journal Article
 
Systematic optimization of Laser-based Additive Manufacturing for multiple mechanical properties
Aboutaleb, A.M.Bian, L.Shamsaei, N. and Thompson, S.M.
IEEE International Conference on Automation Science and Engineering, vol. 2016-November, pp. 780-785. | Conference Proceeding
 
Understanding the Microstructure Formation of Ti-6Al-4V During Direct Laser Deposition via In-Situ Thermal Monitoring
Marshall, G.J.Marshall, Garrett J.Young, W. JosephYoung, W.J.Thompson, S.M.Thompson, Scott M.Shamsaei, N.Shamsaei, NimaDaniewicz, S.R.Daniewicz, Steve R.Shao, Shuai and Shao, S.
JOM, vol. 68, pp. 778-790. | Journal Article
 
Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V
Torries, B.Torries, BrianSterling, Amanda JSterling, A.J.Shamsaei, N.Shamsaei, NimaThompson, Scott MThompson, S.M.Daniewicz, S.R. and Daniewicz, Steve R
Rapid Prototyping Journal, vol. 22, pp. 817-825. | Journal Article
2015
Additive manufacturing of heat exchangers: A case study on a multi-layered Ti-6Al-4V oscillating heat pipe
Thompson, S.M.Aspin, Z.S.Shamsaei, N.Elwany, A. and Bian, L.
Additive Manufacturing, vol. 8, pp. 163-174. | Journal Article
 
An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
Shamsaei, N.Shamsaei, NimaYadollahi, ArefYadollahi, A.Bian, L.Bian, LinkanThompson, Scott M and Thompson, S.M.
Additive Manufacturing, vol. 8, pp. 12-35. | Journal Article
 
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
Thompson, Scott MThompson, S.M.Bian, LinkanBian, L.Shamsaei, N.Shamsaei, NimaYadollahi, Aref and Yadollahi, A.
Additive Manufacturing, vol. 8, pp. 36-62. | Journal Article
 
Effect of substrate thickness on micro-hardness of direct laser deposited Ti-6Al-4V parts
Marshall, G.J.Young, W.J.Thompson, S.M.Seely, D. and Shamsaei, N.
 
Effect of substrate thickness on micro-hardness of direct laser deposited Ti-6Al-4V parts
Marshall, G.J.Young, W.J.Thompson, S.M.Seely, D. and Shamsaei, N.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Effect of vapor flow on the wetting behavior of unstable evaporating menisci in heated capillary tubes
Zhao, W.G.Thompson, S.M.Wang, H.Ma, H.B. and Solbrekken, G.L.
International Journal of Multiphase Flow, vol. 75, pp. 250-256. | Journal Article
 
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Yadollahi, A.Yadollahi, ArefShamsaei, NimaShamsaei, N.Thompson, Scott MThompson, S.M.Seely, D.W. and Seely, Denver W
Materials Science and Engineering A, vol. 644, pp. 171-183. | Journal Article
 
Electromagnetic induction by ferrofluid in an oscillating heat pipe
Monroe, J. G.Monroe, J.G.Vasquez, E. S.Vasquez, E.S.Aspin, Z. S.Aspin, Z.S.Walters, K. B.Walters, K.B.Berg, M. J.Berg, M.J.Thompson, S. M. and Thompson, S.M.
Applied Physics Letters, vol. 106. | Journal Article
 
Energy harvesting via ferrofluidic induction
Monroe, J. GabrielGabriel Monroe, J.Gabriel Monroe, J.Vasquez, E.S.Vasquez, Erick S.Aspin, Zachary S.Aspin, Z.S.Fairley, J.D.Fairley, John D.Walters, K.B.Walters, Keisha B.Berg, M.J.Berg, Matthew J.Thompson, S.M. and Thompson, Scott M.
Proceedings of SPIE - The International Society for Optical Engineering, vol. 9493. | Conference Proceeding
 
Fatigue behavior of ti-6al-4v alloy additively manufactured by laser engineered net shaping
Sterling, A.J.Torries, B.Lugo, M.Shamsaei, N. and Thompson, S.M.
 
Fatigue behavior of ti-6al-4v alloy additively manufactured by laser engineered net shaping
Sterling, A.J.Torries, B.Lugo, M.Shamsaei, N. and Thompson, S.M.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Fatigue Behaviour of Additively Manufactured Ti-6Al-4 v
Sterling, A.Shamsaei, N.Torries, B. and Thompson, S.M.
Procedia Engineering, vol. 133, pp. 576-589. | Conference Proceeding
 
Mechanical and microstructural properties of LENS-produced AISI 316l stainless steel
Yadollahi, A.Seely, D.Patton, B.Shamsaei, N. and Thompson, S.M.
 
Mechanical and microstructural properties of LENS-produced AISI 316l stainless steel
Yadollahi, A.Seely, D.Patton, B.Shamsaei, N. and Thompson, S.M.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. | Conference Proceeding
 
Mechanical and microstructural properties of selective laser melted 17-4 ph stainless steel
Yadollahi, A.Shamsaei, N.Thompson, S.M.Elwany, A. and Bian, L.
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2A-2015. | Conference Proceeding
 
Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
Bian, L.Bian, LinkanThompson, ScottThompson, S.M.Shamsaei, N. and Shamsaei, Nima
JOM, vol. 67, pp. 629-638. | Journal Article
 
Microstructure and mechanical properties of ti-6al-4v parts fabricated by laser engineered net shaping
Bagheri, A.Shamsaei, N. and Thompson, S.M.
ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), vol. 2A-2015. | Conference Proceeding