60 Publications (Page 2 of 3)
2011
Comparative evaluation of sliding mode fuzzy controller and PID controller for a boost converterGuo, Liping⋅Hung, John Y and Nelms, R.MElectric Power Systems Research, vol. 81, (no. 1), pp. 106, 2011.
| Journal Article
2010
Future Energy Systems: Integrating Renewable Energy Sources into the Smart Power Grid Through Industrial ElectronicsLiserre, Marco⋅Sauter, Thilo and Hung, John YIEEE Industrial Electronics Magazine, vol. 4, (no. 1), pp. 18-37, 2010.
| Journal Article
2009
Guest Editorial
Rodriguez-Andina, Juan J and Hung, John Y
IEEE Transactions on Industrial Electronics, vol. 56, (no. 3), pp. 607, 2009-March. | Journal Article
2008
Guest Editorial
Rodrguez-Andina, Juan J and Hung, John Y
IEEE Transactions on Industrial Electronics, vol. 55, (no. 9), pp. 3179, 2008-09-00. | Journal Article
UGV Trailer Position Estimation Using a Dynamic Base RTK System
Travis, William E⋅Hodo, David W⋅Bevly, David M and Hung, John Y
AIAA Guidance, Navigation and Control Conference and Exhibit, AIAA Atmospheric Flight Mechanics Conference and Exhibit, AIAA Modeling and Simulation Technologies Conference and Exhibit, AIAA/AAS Astrodynamics Specialist Conference and Exhibit, and the 26th AIAA Applied Aerodynamics Conference, 2008. | Journal Article
Underactuated Robot Control: Comparing LQR, Subspace Stabilization, and Combined Error Metric Approaches
Marton, L.⋅Hodel, AS⋅Lantos, B. and Hung, John Y
IEEE Transactions on Industrial Electronics, vol. 55, (no. 10), pp. 3724-3730, 2008. | Journal Article
2007
Characterization and Experimental Verification of the Nonlinear Distortion in a Technique for Measuring the Relative Velocity Between Micromachined Structures in Normal Translational MotionDean, Robert⋅Flowers, George T⋅Horvath, Roland⋅Sanders, Nicole⋅Hodel, AScottedward⋅Hung, John Y and Roppel, Thaddeus AIEEE Sensors Journal, vol. 7, (no. 4), pp. 496-501, 2007.
| Journal Article
Seedling Emergence of Smallflower Morningglory and Green Foxtail Subjected to a Pulsed Electric FieldFoshee, Wheeler G⋅Foshee, Wheeler G⋅Foshee, Wheeler G⋅Kirkici, Hulya⋅Kirkici, Hulya⋅Kirkici, Hulya⋅Hung, John Y⋅Hung, John Y⋅Hung, John Y⋅Blythe, Eugene K⋅Blythe, Eugene K ...more » ⋅Blythe, Eugene K⋅Goel, Aditya⋅Goel, Aditya⋅Goel, Aditya⋅Wehtje, Glenn R⋅Wehtje, Glenn R and Wehtje, Glenn R « lessInternational Journal of Vegetable Science, vol. 13, (no. 1), pp. 72, 8/16/2007.
| Journal Article
2006
Posicast-based digital control of the buck converterFeng, Qi⋅Nelms, R. M and Hung, John YIEEE Transactions on Industrial Electronics, vol. 53, (no. 3), pp. 759-767, 2006.
| Journal Article
2004
The application of posicast control to DC-DC converters
Feng, Qi⋅Hung, John Y and Nelms, R. M
2002 37th Intersociety Energy Conversion Engineering Conference (IECEC), pp. 698-703, 2004. | Journal Article
2003
Nonlinear control of a magnetic bearing system
Hung, John Y⋅Albritton, Nathaniel G and Xia, Fan
Mechatronics, vol. 13, (no. 6), pp. 637, 2003. | Journal Article
2001
Parameter estimation using sensitivity points: Tutorial and experiment
Hung, John Y
IEEE Transactions on Industrial Electronics, vol. 48, (no. 6), pp. 1043-1047, 2001. | Journal Article
Totally invariant state feedback controller for position control of synchronous reluctance motor
Shyu, Kuo-Kai⋅Lai, Chiu-Keng and Hung, John Y
IEEE Transactions on Industrial Electronics, vol. 48, (no. 3), pp. 615-624, 2001. | Journal Article
2000
An interdisciplinary laboratory sequence in electrical and computer engineering: curriculum design and assessment resultsRoppel, Thaddeus A⋅Hung, John Y⋅Wentworth, S. W and Hodel, A. SIEEE Transactions on Education, vol. 43, (no. 2), pp. 143-152, 2000.
| Journal Article
1998
Dynamic modeling and control of rotating unbalanced mass (RUM) actuated systems
Bishop, Carlee A⋅Hung, John Y⋅Polites, Michael E and Alhorn, Dean C
Guidance and control 1998; Proceedings of the 21st Annual AAS Rocky Mountain Guidance and Control Conference, Breckenridge, CO; UNITED STATES; 4-8 Feb. 1998. 1998. | Conference Proceeding
1997
Pointing and scanning control of optical instruments using rotating unbalanced masses
Bishop, Carlee A⋅Hung, John Y⋅Polites, Michael E and Alhorn, Dean C
Guidance and control 1997; Proceedings of the 20th Annual AAS Rocky Mountain Guidance and Control Conference, Breckenridge, CO; UNITED STATES; 5-9 Feb. 1997. 1997. | Conference Proceeding
1996
A Hybrid Nonlinear Control Scheme for Active Magnetic Bearings
XIA, F.⋅ALBRITTON, N. G⋅Hung, John Y and NELMS, R. M
Auburn Univ , Third International Symposium on Magnetic Suspension Technology p 317-326 (SEE N96-35897 12-18); UNITED STATES. 1996. | Conference Proceeding
A novel integrated electric motor/pump for underwater applications
Cho, C. Peter⋅Fussell, Barry K and Hung, John Y
Journal of Applied Physics, vol. 79, (no. 8), pp. 5548, 1996-00-00. | Journal Article
CASE METHODOLOGY: ADDRESSING THE QUESTIONS OF HOW AND WHY
Bishop, Carlee A and Hung, John Y
1996 ASEE Annual Conference & Exposition; Washington, DC; USA; 23-26 June 1996. 1996. | Conference Proceeding
Pointing and Scanning Control of Instruments Using Rotating Unbalanced Masses
Hung, John Y
NASA no. 19980206168; UNITED STATES. 1996. | Conference Proceeding
Pointing and Scanning Control of Optical Instruments using Rotating Unbalanced Masses
Bishop, C. A⋅Hung, John Y⋅Polites, M. E and Alhorn, D. C
1996. | Journal Article
Technology advances for magnetic bearings
Nolan, Steve and Hung, John Y
Space Technology and Applications International Forum (STAIF-96); Proceedings of the 1st Conference on Commercial Development of Space, Albuquerque, NM; UNITED STATES; 7-11 Jan. 1996. 1996. | Conference Proceeding
1995
Devide for dampening vibratory motion
Cho, Chahee P and Hung, John Y
The Journal of the Acoustical Society of America, vol. 98, (no. 3), pp. 1260, 1995-09-00. | Journal Article
Magnetic bearing control using fuzzy logic
Hung, John Y
IEEE Transactions on Industry Applications, vol. 31, (no. 6), pp. 1492-1497, 1995. | Journal Article
1994
An output feedback sliding mode speed regulator for DC drives
Hung, John Y⋅Nelms, R. M and Stevenson, P. B
IEEE Transactions on Industry Applications, vol. 30, (no. 3), pp. 691-698, 1994. | Journal Article