189 Publications (Page 4 of 8)
2023
Mechanical properties of laser powder directed energy deposited NASA HR-1 superalloy: Effects of powder reuse and part orientation. Thin-Walled Structures
. | Journal Article
 
Pitting corrosion behavior and corrosion protection performance of cold sprayed double layered noble barrier coating on magnesium-based alloy in chloride containing solutions
Daroonparvar, M.⋅Helmer, A.⋅Ralls, A.M.⋅Farooq Khan, M.U.⋅Kasar, A.K.⋅Gupta, R.K.⋅Misra, M.⋅Shao, S.⋅Menezes, P.L. and Shamsaei, N.
Journal of Magnesium and Alloys, vol. 11, pp. 3099-3119. | Journal Article
 
Study on the corrosion behavior of cold sprayed aluminum-based coatings on Mg-based alloy in chloride containing solution: Effect of N2 processing gas temperature
Daroonparvar, M.⋅Helmer, A.⋅Ralls, A.M.⋅Kasar, A.K.⋅Farooq Khan, M.U.⋅Menezes, P.L.⋅Misra, M.⋅Shao, S. and Gupta, R.K.
Corrosion Science, vol. 223. | Journal Article
 
Superior effects of hybrid laser shock peening and ultrasonic nanocrystalline surface modification on fatigue behavior of additive manufactured AlSi10Mg
Maleki, E.⋅Bagherifard, S.⋅Unal, O.⋅Jam, A.⋅Shao, S.⋅Guagliano, M. and Shamsaei, N.
Surface and Coatings Technology, vol. 463. | Journal Article
 
Surface post-treatment of additively manufactured components
Diaz, A.⋅Michaud, J.⋅Mikulas, T.⋅Boykin, J.⋅Shamsaei, N.⋅Shao, S.⋅Lee, S.J.⋅Pegues, J.⋅Hall, T.⋅Stull, J.⋅Duffy, T.S.⋅Mirabal, A.J. and Gradl, P.
(pp. 223-283)
 
Tensile and fatigue behaviors of additively manufactured AlSi10Mg: Effect of solutionizing and aging heat treatments
Baig, S.⋅Ghiaasiaan, R.⋅Shao, S. and Shamsaei, N.
Fatigue and Fracture of Engineering Materials and Structures, vol. 46, pp. 2662-2680. | Journal Article
2022
Additively manufactured Haynes 282: effect of unimodal vs. bimodal \upgammaʹ- microstructure on mechanical properties
Ghiaasiaan, Reza⋅Ahmad, Nabeel⋅Gradl, Paul R.⋅Shao, Shuai and Shamsaei, Nima
Materials Science and Engineering: A, vol. 831, pp. 142234. | Journal Article
 
Additively manufactured IN718 in thin wall and narrow flow channel geometries: Effects of post-processing and wall thickness on tensile and fatigue behaviors
Ahmad, N.⋅Shao, S.⋅Seifi, M. and Shamsaei, N.
Additive Manufacturing, vol. 60. | Journal Article
 
Defect Criticality Analysis on Fatigue Life of L-PBF 17-4 PH Stainless Steel via Machine Learning
International Journal of Fatigue. | Journal Article
 
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, Amir⋅Zhao, Cang⋅He, Yining⋅Reza Ghiaasiaan, S.⋅Ghiaasiaan, Seyed Reza⋅Shi, Bo⋅Shao, Shuai⋅Shamsaei, Nima⋅Wu, Ziheng⋅Kouraytem, Nadia⋅Sun, Tao⋅Pauza, Joseph⋅Gordon, Jerard V.⋅Webler, Bryan⋅Parab, Niranjan D.⋅Asherloo, Mohammadreza⋅Guo, Qilin⋅Chen, Lianyi and Rollett, Anthony D.
(pp. 100974). Elsevier BV
 
Fatigue behavior and modeling of additively manufactured IN718: The effect of surface treatments and surface measurement techniques
Lee, S.⋅Shao, S.⋅Wells, D.N.⋅Zetek, M.⋅Kepka, M. and Shamsaei, N.
Journal of Materials Processing Technology, vol. 302. | Journal Article
 
Feature-based volumetric defect classification in metal additive manufacturing
Poudel, Arun⋅Yasin, Mohammad Salman⋅Ye, Jiafeng⋅Liu, Jia⋅Vinel, Aleksandr⋅Shao, Shuai and Shamsaei, Nima
Nature Communications, vol. 13, (no. 1), 2022. | Journal Article
 
Laser powder directed energy deposition (LP-DED) NASA HR-1 alloy: Laser power and heat treatment effects on microstructure and mechanical properties
Soltani-Tehrani, A.⋅Chen, P.⋅Katsarelis, C.⋅Gradl, P.⋅Shao, S. and Shamsaei, N.
Additive Manufacturing Letters, vol. 3. | Journal Article
 
Microstructure and Deformation Behavior of Additively Manufactured 17?4 Stainless Steel: Laser Powder Bed Fusion vs. Laser Powder Directed Energy Deposition
Nezhadfar, P.D.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
JOM, vol. 74, pp. 1136-1148. | Journal Article
 
Revealing deformation mechanisms in additively manufactured Alloy 718: Cryogenic to elevated temperatures
Ahmad, N.⋅Ghiaasiaan, R.⋅Gradl, P.R.⋅Shao, S. and Shamsaei, N.
Materials Science and Engineering A, vol. 849. | Journal Article
 
Strain energy-based fatigue failure analyses of LB-PBF Inconel 718: Effect of build orientation
Jirandehi, A.P.⋅Hajshirmohammadi, B.⋅Carrion, P.⋅Khonsari, M.M.⋅Shamsaei, N. and Shao, S.
Additive Manufacturing, vol. 52. | Journal Article
 
Synergistic Effect of Microstructure and Defects on the Initiation of Fatigue Cracks in Additively Manufactured Inconel 718
International Journal of Fatigue. | Journal Article
 
Ti-6Al-4V powder characteristics in laser powder bed fusion: The effect on tensile and fatigue behavior
Soltani-Tehrani, A.⋅Habibnejad-Korayem, M.⋅Shao, S.⋅Haghshenas, M. and Shamsaei, N.
Additive Manufacturing, vol. 51. | Journal Article
 
Ti-6Al-4V powder reuse in laser powder bed fusion (L-PBF): The effect on porosity, microstructure, and mechanical behavior. International Journal of Fatigue
Soltani-Tehrani, A.⋅Isaac, J.P.⋅Tippur, H.V.⋅Silva, D.F.⋅Shao, S. and Shamsaei, N.
2021
A Bayesian MACHINE LEARNING FRAMEWORK FOR SELECTION OF THE STRAIN GRADIENT PLASTICITY MULTISCALE MODEL
Tan, J.⋅Maupin, K.⋅Shao, S. and Faghihi, D.
 
A Comparative Study on Fatigue Performance of Various Additively Manufactured Titanium Alloys
Yasin, M.S.⋅Soltani-Tehrani, A.⋅Shao, S.⋅Haghshenas, M. and Shamsaei, N.
(pp. 519-525)
 
An investigation into the effects of cyclic strain rate on the high cycle and very high cycle fatigue behaviors of wrought and additively manufactured Inconel 718
Muhammad, M.⋅Frye, P.⋅Simsiriwong, J.⋅Shao, S. and Shamsaei, N.
International Journal of Fatigue, vol. 144. | Journal Article
 
A predictive discrete-continuum multiscale model of plasticity with quantified uncertainty
Tan, Jingye⋅Villa, Umberto⋅Shamsaei, Nima⋅Shao, Shuai⋅Zbib, Hussein M and Faghihi, Danial
International Journal of Plasticity, vol. 138, Mar 2021. | Journal Article
 
A theoretical calculation of stacking fault energy of Ni alloys: The effects of temperature and composition
Dodaran, M.S.⋅Guo, S.⋅Khonsari, M.M.⋅Shamsaei, N. and Shao, S.
Computational Materials Science, vol. 191. | Journal Article
 
Effects of Powder Particle Size on Fatigue Performance of Laser Powder-Bed Fused Ti-6Al-4V
Soltani-Tehrani, A.⋅Yasin, M.S.⋅Shao, S.⋅Haghshenas, M. and Shamsaei, N.
(pp. 84-93)